IncursionArmorWorkshop Back to Main Armor List
The default small gang armor logistic which can operate independently and remain cap stable.
The tracking link bonus, when applied to the right ships, can significantly boost the fleet's effective damage output.
Typical rigs choices revolves around Medium Capacitor Control Circuits and Medium Remote Repair Augmentors.
The former is more effective when stacked with capacitor modules, while the latter is more ideal when aiming to fit all 4 tracking links.
The explosive resist hole is not a significant weakness due to the ship's small sig radius.
With exception of the Kundalini Manifest site, an Explosive Hardener/Membrane is better replaced with an EANM.
| Minimum skill (recommended) |
|---|
- Remote Armor Repair Systems 5 (very important for Oneiros cap stability)
- Multitasking 3 (allows 10 locked targets, no locking delay when changing rep target)
- Sensor Linking 4 (needed for T2 Tracking Links)
- Starter Logi 4 cheap fit, designed to carry minimum 1 tracking links.
- The resist profile favor EM/Thermal resists (Kin/Exp torpedoes in Vanguard sites poses little threat).
- The Damage Control module avoids being stacked nerfed against the resist bonus received from the armor gang links.
- For Assaults/Headquaters, swap out the tracking link for an AB. However, this will require a faction PDS to fit.
| Ship Details |
|---|
| Remote repair | 307 armor/s |
| Drone repair | 307 armor/s - Medium Armor Maintenance Bot II |
| Armor resists | 75/84/92/55 (EM/Therm/Kin/Exp) |
| Armor defence efficiency | 326 - repped by 1x Large Solace remote repair |
| Armor | 7,448 |
| EHP | 42,517 |
| Scan resolution | 456mm |
| Targeting range | 88km |
| Speed | 261m/s |
| Signature radius | 70m |
| Capacitor state | Stable |
| High Power |
|---|
| 4x Large 'Solace' I Remote Bulwark Reconstruction |
| Medium Power |
|---|
| Tracking Link II |
| Cap Recharger II |
| Low Power |
|---|
| Damage Control II |
| 2x Energized Adaptive Nano Membrane II |
| Power Diagnostic System II |
| 1600mm Reinforced Rolled Tungsten Plates I |
| Rig Slot |
|---|
| 2x Medium Remote Repair Augmentor I |
- Middle-ground affordable build designed for full cap stability and 4 tracking links.
- Requires a minimum Squire EG-603 implant (3% powergrid) and Squire EM-805 (5% capacitor).
- The resist profile favor EM/Thermal resists (Kin/Exp torpedoes in Vanguard sites poses little threat).
- The Damage Control module avoids being stacked nerfed against the resist bonus received from the armor gang links.
- Logistics 4 pilots will need to replace 1-4 Tracking Links with Cap Rechargers to maintain cap stability.
| Ship Details | |
|---|
| Remote repair | 307 armor/s |
| Drone repair | 307 armor/s - Medium Armor Maintenance Bot II |
| Armor resists | 77/85/93/59 (EM/Therm/Kin/Exp) |
| Armor defence efficiency | 353 - repped by 1x Large Solace remote repair |
| Armor | 7,748 |
| EHP | 45,078 |
| Scan resolution | 456mm |
| Targeting range | 88km |
| Speed | 273m/s |
| Signature radius | 70m |
| Capacitor state | Stable - with Logistics 5/implants |
| High Power |
|---|
| 4x Large 'Solace' I Remote Bulwark Reconstruction |
| Medium Power |
|---|
| 4x Tracking Link II |
| Low Power |
|---|
| Damage Control II |
| 2x Imperial Navy Energized Adaptive Nano Membrane |
| True Sansha Capacitor Power Relay |
| 1600mm Reinforced Rolled Tungsten Plates I |
| Rig Slot |
|---|
| Medium Remote Repair Augmentor II |
| Medium Capacitor Control Circuit II |
- Simple module swap from 1A. Less emphasis on utilizing the Tracking Links.
- A Power Diagnostic System is fitted to increase powergrid for an afterburner.
- 2x Sensor Booster and 10MN Afterburner added to improve lock time and survivability.
- Again, the resist profile favor EM/Thermal (torpedoes/cruise missiles Kin/Exp damage is greatly reduced by the AB).
- Logistics 4 pilots will need to replace Sensor Booster with Cap Rechargers to maintain cap stability.
Special Note
When running in the Kundalini Manifest (aka MOM) sites, the resist profile needs to be modified slightly.
Lirsautton Parichaya stealth bomber Kin/Exp torpedoes poses a huge threat. The Oneiros's Exp resist hole needs to be plugged.
As all MOM fleets will run a fleet booster (that gives armor resist bonus), the Damage Control module should not be removed to avoid a stacking nerf.
Instead, remove the 2nd EANM and replace it with an affordable Centum/Corpum/Corelum C-Type Energized Explosive Membrane.
This will give a basic (un-boosted) resist profile of 70/80/90/72 (EM/Therm/Kin/Exp).
| Ship Details | |
|---|
| Remote repair | 307 armor/s |
| Drone repair | 307 armor/s - Medium Armor Maintenance Bot II |
| Armor resists | 77/85/93/59 (EM/Therm/Kin/Exp) |
| Armor defence efficiency | 353 - repped by 1x Large Solace remote repair |
| Armor | 7,748 |
| EHP | 45,078 |
| Scan resolution | 456-1111mm |
| Targeting range | 88km |
| Speed | 273-604m/s |
| Signature radius | 70m |
| Capacitor state | Stable - with Logistics 5/implants |
| High Power |
|---|
| 4x Large 'Solace' I Remote Bulwark Reconstruction |
| Medium Power |
|---|
| 10MN Afterburner II |
| 2x Sensor Booster II |
| Cap Recharger II |
| Low Power |
|---|
| Damage Control II |
| 2x Imperial Navy Energized Adaptive Nano Membrane |
| Power Diagnostic System II |
| 1600mm Reinforced Rolled Tungsten Plates I |
| Rig Slot |
|---|
| Medium Remote Repair Augmentor II |
| Medium Capacitor Control Circuit II |
- Elite (and horribly expensive) build designed for full cap stability and 4 tracking links.
- Requires a minimum Squire EG-606 implant (6% powergrid), Squire EM-806 (6% capacitor) and Noble RA-706 (-6% repair cap).
- The resist profile favor EM/Thermal resists (Kin/Exp torpedoes in Vanguard sites poses little threat).
- The Damage Control module avoids being stacked nerfed against the resist bonus received from the armor gang links.
- Logistics 4 pilots will need to replace 1-4 Tracking Links with Cap Rechargers to maintain cap stability.
| Ship Details | |
|---|
| Remote repair | 341 armor/s |
| Drone repair | 307 armor/s - Medium Armor Maintenance Bot II |
| Armor resists | 77/85/93/59 (EM/Therm/Kin/Exp) |
| Armor defence efficiency | 353 - repped by 1x Large Solace remote repair |
| Armor | 7,748 |
| EHP | 45,078 |
| Scan resolution | 456mm |
| Targeting range | 88km |
| Speed | 261m/s |
| Signature radius | 70m |
| Capacitor state | Stable - with Logistics 5/implants |
| High Power |
|---|
| 4x Large Remote Armor Repair System II |
| Medium Power |
|---|
| 4x Tracking Link II |
| Low Power |
|---|
| Damage Control II |
| 2x Imperial Navy Energized Adaptive Nano Membrane |
| Imperial Navy Capacitor Power Relay |
| 'Bailey' 1600mm Reinforced Steel Plates I |
| Rig Slot |
|---|
| 2x Medium Remote Repair Augmentor II |
- Followup from 2A. with minor changes to modules. Simple swap in/out.
- A faction Power Diagnostic System is fitted to increase powergrid for an afterburner and the 1600mm Bailey plate replaced with a cheaper Meta4.
- 2x Sensor Booster and 10MN Afterburner added to improve lock time and survivability.
- Again, the resist profile favor EM/Thermal (torpedoes/cruise missiles Kin/Exp damage is greatly reduced by the AB).
- Logistics 4 pilots will need to replace Sensor Booster with Cap Rechargers to maintain cap stability.
Special Note
When running in the Kundalini Manifest (aka MOM) sites, the resist profile needs to be modified slightly.
Lirsautton Parichaya stealth bomber Kin/Exp torpedoes poses a huge threat. The Oneiros's Exp resist hole needs to be plugged.
As all MOM fleets will run a fleet booster (that gives armor resist bonus), the Damage Control module should not be removed to avoid a stacking nerf.
Instead, remove the 2nd EANM and replace it with an affordable Centum/Corpum/Corelum C-Type Energized Explosive Membrane.
This will give a basic (un-boosted) resist profile of 70/80/90/72 (EM/Therm/Kin/Exp).
| Ship Details | |
|---|
| Remote repair | 341 armor/s |
| Drone repair | 307 armor/s - Medium Armor Maintenance Bot II |
| Armor resists | 77/85/93/59 (EM/Therm/Kin/Exp) |
| Armor defence efficiency | 353 - repped by 1x Large Solace remote repair |
| Armor | 7,748 |
| EHP | 45,078 |
| Scan resolution | 456-1111mm |
| Targeting range | 88km |
| Speed | 261-578m/s |
| Signature radius | 70m |
| Capacitor state | Stable - with Logistics 5/implants |
| High Power |
|---|
| 4x Large Remote Armor Repair System II |
| Medium Power |
|---|
| 10MN Afterburner II |
| 2x Sensor Booster II |
| Cap Recharger II |
| Low Power |
|---|
| Damage Control II |
| 2x Imperial Navy Energized Adaptive Nano Membrane |
| True Sansha Power Diagnostic System |
| 1600mm Reinforced Rolled Tungsten Plates I |
| Rig Slot |
|---|
| 2x Medium Remote Repair Augmentor II |
IncursionArmorWorkshop Back to Main Armor List
